“TabTech” Semi Automatic Auger Powder Filling Machine is precision built on sturdy welded MS frame completely enclosed in stainless steel sheet and doors are provided to facilitate the servicing of machine. The auger powder filler unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body.
The dried, sterilized bottles are fed through the infeed Turn Table on the infeed SS/Delr in conveyor belt at the required speed for feeding. There are two Filling Heads and hence bottle reaches under the first filling head, it is held by the pneumatic bottle holder. Immediately it is be sensed by the bottle sensor and gives signals to magnetic clutch to start to rotate which is mounted on auger shaft. Auger type powder filling machine will fill the desired amount of powder to the bottle through auger, where rotation time is set in the Timer. After filling of first bottle pneumatic bottle holder releases the first bottle to move on conveyor. At the same time second bottle also moves along with the first bottle in empty condition. In the second filling head same operation is performed but this second bottle gets filled and first bottle moves further for next operation.
|No. of Heads||1|
|Output/Hour*||1000 to 1400*|
|Direction of Movement||Left to Right|
|Fill Size***||10gm to 200gm|
|Elec. Spec.||Main Motor||1 HP|
|Conveyor||0.25 HP / 230 Volts / 50 Hz.|
|Air Consumption||4 to 6 cfm|
|Change Parts||Funnel& Auger Set|
Note : –
* Also available Complete Line Machines / Separate MonoBlock Machines.
* Output Depends on Container size, fill size, Neck diameter of container, and nature of liquid etc.
* Special Product can run With help of change parts.
* All Images are representation purpose only actual product may vary.
* Electric Voltage and frequency can be provided as per customer requirement.
* Due to continuous improvements in the machines, specification of the machines is subject to change without any prior notice.
* These all Machines should not be used to handle materials restricted under Narcotics Act. It should not be used to handle explosive & / or radioactive materials.
- ± 3% Filling accuracy on single dose.
- No bottle no filling system.
- Contact Parts S.S.316
- Standard Branded bought-outs use in machine.
- Standard electric control panel push button on machine.
- Rigid vibration, free construction for trouble free performance.
- S. elegantly Matt finished body with SS Square Body Main Frame 40mm x 40mm.
- Elegant and easy control panel for total control on operation.
- Minimum changeover time, from one size to another container or fill size.
Also Available Machines
- Automatic Rotary Type Auger Powder Filing Machine
- Automatic Volumetric Auger Powder Filing Machine
- Available models with 1 Head, 2 Head, 4 Head, 16 Head, 18 Head & 24 Head.
- Available models for working capacity 5 gm. to 500 gm with the help of change part.
- Acrylic Cabinet for the working area.
- Change Parts
- PLC HMI with Color Touch Screen
- 21 CFR with Part 11 Compliance Facility
- Fully Computerized with SCADA Facility